Brotech CDF flexo printing machine Finishing system for digitally printed labels
Brotech CDF is the best commercially available, cost-effective, multi-functional system for processing digitally printed labels. The machine is fully servo-motor driven equipped with a rotary flexo printing unit and a fully rotary/semi-rotary die cutting unit . The Brotech CDF gives you the ability to flexo print, varnish, cold gilding, laminating, full/semi-rotary die cutting, slitting and double scrolling. Complete with a high-performance UV/LED UV drying system, it is easy and convenient to use and significantly reduces waste.
Video
Product information
Specification(with standard configuration)
| MODEL | CDF 330 | CDF 420 |
| Maximum web width | 340mm | 430mm |
| Maximum diameter of unwind reel | 700mm | 700mm |
| Maximum diameter of the rewind reel | 600mm | 600mm |
| Maximum die cutting width | 330mm | 420mm |
| Maximum speed of the semi-rotary barbell | 70m/min | 70m/min |
| Maximum semi-rotary die-cutting report | 457mm | 457mm |
| Maximum working speed | 130m/min | 130m/min |
| Die-cutting accuracy | ±0.15mm | ±0.15mm |
| Air supply | 8bar | 8bar |
| Power supply | 3PH+N+PE | 3PH+N+PE |
| Dimensions | 3.7×2.1×1.6m | 3.7×2.2×1.6m |
| Weight | 2.5 T | 3 T |
Print substrate(with standard configuration)
The standard thickness of the material is from 35-250µm(the range can be increased). It is possible to cut film, paper, thin cardboard. It is possible to adapt the machine to cut other substrates.
Characteristics of the units
Fully rotary flexographic unit:
flexographic printing, varnishing, laminating, cold gilding.
Fully rotary/semi-rotary die cutting unit:
ability to change the operation mode of the rotary die cutting unit from the control panel.
Options available
- UV, hot air, IR, LED UV or combination drying.
- Cooling roller
- Set of air shafts from 1″ to 6+”
- Handling thicker material up to 400µm